This lightning protection box is mainly used as a lightning protection device at the front end of the 380V AC power supply system. Equipped with overheat and overcurrent failure tripping protection function; Equipped with protective work instructions and remote fault alarm ports (dry contacts) for remote monitoring.
Product models: B3P-040 II-I, B3P-060 II-I, B3P-080 II-I, B3P-100 II-I, B3P-120 II-I
SPD type: Class II
Rated voltage: 63A
1、 Product Description:
This lightning protection box is mainly used as a lightning protection device at the front end of the 380V AC power supply system. Equipped with overheat and overcurrent failure tripping protection function; Equipped with protective work instructions and remote fault alarm ports (dry contacts) for remote monitoring.
There are four inlet and outlet holes at the upper and lower ends of the lightning protection box; There are 3 M8 hex screws on the grounding copper bar; The distribution input is a 3-phase 63A circuit breaker, and the distribution output is a terminal block that can connect up to 16mm2 wires; The lightning strike counter can be selected according to user needs.
2、 Product features:
1. Indoor protection design IP20;
2. Surge 3+1 full mode protection;
3. Lightning protection status indication function;
4. Kevin wiring method, lower residual voltage;
5. Temperature controlled circuit breaker technology to avoid fire hazards;
6. Remote monitoring function for lightning protection module status;
7. Lightning strike counting function.
3、 Product structure dimensions:
4、 Product schematic:
